TY - JOUR
T1 - Characterization and properties of metallic iron nanoparticles
T2 - Spectroscopy, electrochemistry, and kinetics
AU - Nurmi, James T.
AU - Tratnyek, Paul G.
AU - Sarathy, Vaishnavi
AU - Baer, Donald R.
AU - Amonette, James E.
AU - Pecher, Klaus
AU - Wang, Chongmin
AU - Linehan, John C.
AU - Matson, Dean W.
AU - Penn, R. Lee
AU - Driessen, Michelle D.
PY - 2005/3/1
Y1 - 2005/3/1
N2 - There are reports that nano-sized zero-valent iron (Fe0) exhibits greater reactivity than micro-sized particles of Fe0, and it has been suggested that the higher reactivity of nano-Fe0 may impart advantages for groundwater remediation or other environmental applications. However, most of these reports are preliminary in that they leave a host of potentially significant (and often challenging) material or process variables either uncontrolled or unresolved. In an effort to better understand the reactivity of nano-Fe0, we have used a variety of complementary techniques to characterize two widely studied nano-Fe0 preparations: one synthesized by reduction of goethite with heat and H2 (Fe H2) and the other by reductive precipitation with borohydride (FeBH). FeH2 is a two-phase material consisting of 40 nm α-Fe0 (made up of crystals approximately the size of the particles) and Fe3O4 particles of similar size or larger containing reduced sulfur; whereas FeBH is mostly 20-80 nm metallic Fe particles (aggregates of <1.5 nm grains) with an oxide shell/coating that is high in oxidized boron. The FeBH particles further aggregate into chains. Both materials exhibit corrosion potentials that are more negative than nano-sized Fe2O3, Fe3O4, micro-sized Fe0, or a solid Fe0 disk, which is consistent with their rapid reduction of oxygen, benzoquinone, and carbon tetrachloride. Benzoquinone - which presumably probes inner-sphere surface reactions - reacts more rapidly with FeBH than FeH2, whereas carbon tetrachloride reacts at similar rates with FeBH and FeH2, presumably by outer-sphere electron transfer. Both types of nano-Fe0 react more rapidly than microsized Fe0 based on mass-normalized rate constants, but surface area-normalized rate constants do not show a significant nano-size effect. The distribution of products from reduction of carbon tetrachloride is more favorable with FeH2, which produces less chloroform than reaction with FeBH.
AB - There are reports that nano-sized zero-valent iron (Fe0) exhibits greater reactivity than micro-sized particles of Fe0, and it has been suggested that the higher reactivity of nano-Fe0 may impart advantages for groundwater remediation or other environmental applications. However, most of these reports are preliminary in that they leave a host of potentially significant (and often challenging) material or process variables either uncontrolled or unresolved. In an effort to better understand the reactivity of nano-Fe0, we have used a variety of complementary techniques to characterize two widely studied nano-Fe0 preparations: one synthesized by reduction of goethite with heat and H2 (Fe H2) and the other by reductive precipitation with borohydride (FeBH). FeH2 is a two-phase material consisting of 40 nm α-Fe0 (made up of crystals approximately the size of the particles) and Fe3O4 particles of similar size or larger containing reduced sulfur; whereas FeBH is mostly 20-80 nm metallic Fe particles (aggregates of <1.5 nm grains) with an oxide shell/coating that is high in oxidized boron. The FeBH particles further aggregate into chains. Both materials exhibit corrosion potentials that are more negative than nano-sized Fe2O3, Fe3O4, micro-sized Fe0, or a solid Fe0 disk, which is consistent with their rapid reduction of oxygen, benzoquinone, and carbon tetrachloride. Benzoquinone - which presumably probes inner-sphere surface reactions - reacts more rapidly with FeBH than FeH2, whereas carbon tetrachloride reacts at similar rates with FeBH and FeH2, presumably by outer-sphere electron transfer. Both types of nano-Fe0 react more rapidly than microsized Fe0 based on mass-normalized rate constants, but surface area-normalized rate constants do not show a significant nano-size effect. The distribution of products from reduction of carbon tetrachloride is more favorable with FeH2, which produces less chloroform than reaction with FeBH.
UR - http://www.scopus.com/inward/record.url?scp=20044363441&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=20044363441&partnerID=8YFLogxK
U2 - 10.1021/es049190u
DO - 10.1021/es049190u
M3 - Article
C2 - 15787360
AN - SCOPUS:20044363441
SN - 0013-936X
VL - 39
SP - 1221
EP - 1230
JO - Environmental Science & Technology
JF - Environmental Science & Technology
IS - 5
ER -