Skip to main navigation Skip to search Skip to main content

Influence of irradiance on Knoop hardness, degree of conversion, and polymerization shrinkage of nanofilled and microhybrid composite resins

  • Ana Paula Piovezan Fugolin
  • , Lourenço Correr-Sobrinho
  • , Américo Bortolazzo Correr
  • , Mário Alexandre Coelho Sinhoreti
  • , Ricardo Danil Guiraldo
  • , Simonides Consani

Research output: Contribution to journal › Article › peer-review

Abstract

The purpose of this study was to investigate the influence of the irradiance emitted by a light-curing unit on microhardness, degree of conversion (DC), and gaps resulting from shrinkage of 2 dental composite resins. Cylinders of nanofilled and microhybrid composites were fabricated and light cured. After 24 hours, the tops and bottoms of the specimens were evaluated via indentation testing and Fourier transform infrared spectroscopy to determine Knoop hardness number (KHN) and DC, respectively. Gap width (representing polymerization shrinkage) was measured under a scanning electron microscope. The nanofilled composite specimens presented significantly greater KHNs than did the microhybrid specimens (P < 0.05). The microhybrid composite resin exhibited significantly greater DC and gap width than the nanofilled material (P < 0.05). Irradiance had a mostly material-dependent influence on the hardness and DC, but not the polymerization shrinkage, of composite resins.

Original languageEnglish (US)
Pages (from-to)26-31
Number of pages6
JournalGeneral dentistry
Volume64
Issue number2
StatePublished - Mar 1 2016

ASJC Scopus subject areas

  • General Dentistry

Fingerprint

Dive into the research topics of 'Influence of irradiance on Knoop hardness, degree of conversion, and polymerization shrinkage of nanofilled and microhybrid composite resins'. Together they form a unique fingerprint.

Cite this